We gathered for the foundation anniversary of Kalıpsan Alüminyum.
We continue to provide the best quality service with our years of experience and expert staff.
Solar mounting systems (solar mounting systems); It is used to fix solar panels to various surfaces such as roofs, parking lots or terrain.
Solar mounting systems help hold solar panels or arrays in place and work as the support structure for the solar modules. Solar mounting systems are usually made of steel or aluminum supports that can hold solar panels in place under extreme loads from wind, snow and frost. There are different mounting systems such as rooftop and floor mounted systems; however, not every system may be suitable for your property.
What are the types of solar mounting systems?
Types of solar mounting systems may vary according to variations such as intended use, structure and installation area.
Rooftop solar mounting systems
Sloped roof solar mounting systems
Pitched roof solar mounting systems are commonly seen in residential buildings. Rail-based systems with multiple connection methods are offered for residential and commercial uses.
Flat roof solar mounting systems
Flat roof solar mounting systems are mainly used for buildings that usually have large and flat roofs, such as commercial or industrial buildings.
It is easy to install and often bends to maximize sun exposure.
Balasted and non-drilling systems
Ballasted and non-penetrating systems distribute their weight on the roof. Weight-based loading arrays are used to hold onto the roof.
These solar mounting systems use steel or aluminum making installation quick and easy.
Ground mounted solar systems
Ground-mounted solar systems are mostly used in undeveloped land (including landfills). They can also be used for residential areas but are not usually the first choice for homeowners.
These systems can be installed at any angle or orientation and are generally easier to install and maintain.
Standard floor connections
A metal frame that is hammered or screwed into the floor is used to hold the panels at a fixed angle.
Pole mounted solar energy systems
Pole-mounted solar systems include a single pole to raise multiple panels higher off the ground and allow it to tilt automatically to maximize sun exposure.
Carport mounting systems
Carport mounting systems are perfect for single or double row parking, as well as commercial and industrial parking lots. It can also be installed with EV charging stations.
To contact us about our solar mounting systems fasteners, click here.
Solar energy panel mounting; refers to the methods in which solar panels are fixed in place for a pitched roof, flat roof or terrain. Solar panel mounting allows for design flexibility, diverse aesthetics, and greater solar power generation.
Because each solar energy project is unique, it may not be possible to specify a single solar panel mounting system. For this reason, we have compiled the different types of solar panel mounting systems available for you.
Solar Panels for Pitched Roofs
Rooftop Solar Panels
The most common type of solar panel mounting is the rooftop system. Solar panels are fixed directly to the roof and are seen as a cost-effective solution. Because the panels are outside, rooftop solar panels are ideal for ventilation and optimum performance.
When installing a rooftop solar system, metal hooks are drilled directly into the roof rafters. In some cases it may involve the removal and replacement of some of the roof tiles.
The vertical rails go over the hooks to which your solar panels are clamped and a weatherproof seal is applied around the hooks for maximum protection.
Roof Solar Panels
Integrated solar panels on the roof are the ideal solution for new builds or anyone looking to renovate a property roof. Due to its stylish and aesthetic appearance, the roof system can be preferred. The solar panels appear flush with the rest of the roof. However, this causes less ventilation around the panels, resulting in 5-10% lower efficiency.
Flat Roof Solar Panel Systems
Flat roof solar energy systems refer to the installation of solar panels on an almost flat roof with an inclination of approximately 1-10 degrees.
The tile hook used for solar energy installation helps to reduce your labor cost by saving money by affecting the installation time of solar panels.
Tile hook mounting for solar panel installation
- Align position indicator,
- Mark the positions of all tile hooks,
- Insert the tile hook and make sure all hooks are secured to the joists,
- Install the rails horizontally / vertically,
- Install the intermediate clamp between the two PV modules,
- Install the end clamp for each row of solar panels,
- Check that all solar mounting components are firmly attached and complete,
Click here to access detailed information and technical specifications of the tile hook that we produce for tile roof solar energy mounting systems.
We were at the 10th International Aluminum Symposium
Leading domestic aluminum manufacturers and global supplier companies will present their products and technologies to the visitors at the Istanbul Expo Center.
As Kalıpsan Aluminum, we took our place at the 10th International Aluminum Symposium on 14-16 October 2021.
The Aluminum Sector is Ready for a Giant Meeting Aluexpo renewed its growth record this year as well. IFM hosts the meeting of the aluminum industry in halls 1 and 2, which have been completely renovated with an exhibition area of 11,700 m2.
Visitor registrations and interest 1 month before the fair marks the biggest industry meeting to date. Global trends and rising technological and commercial developments in the aluminum sectors show that expectations from ALUEXPO are rising.
IATF 16949 Quality Certificate Audit Interview
IATF 16949:2016 Automotive Management System is a quality management standard covering international technical requirements for the automotive industry.
This quality system ensures that automotive products are of the highest quality at all stages from design to maintenance.
We participated in the 2021 International Solarex Istanbul Solar Energy and Technologies Fair, which took place on 7 – 9 April.
Solar Energy and Technologies Fair “Solarex Istanbul”, the first and only fair on solar energy in our country, is a fair that supports taking big steps towards Turkey’s becoming a production center in the field of solar energy.
“International Solar Energy and Technologies Fair”, which is a commercial platform where the latest technologies in the world in the field of solar energy and new products produced in Turkey are presented together, has the feature of being an organization where the leading companies and representatives of the sector meet.
We Took Our Place in 2023 Aluexpo Fair
Leading domestic aluminum manufacturers and global suppliers will present their products and technologies to Aluexpo Istanbul 2023 visitors at the Istanbul Expo Center. We look forward to your visit on 12-14 October 2023.
We took our place at Intersolar 2023
We look forward to your visit on 14-16 June 2023.
